You can also go to Danalock's website and view the mounting video. The mobile app will walk you though calibrating the lock. During this step, make sure your door is open and not closed. If you don't see a light, your batteries are disconnected, so take the cover off and check to make sure they are connected.įinally, log on to the Danalock app and start configuring your lock. A light should flash which means your Danalock is ready. Once the lock is on your door, pull out the plastic tab coming from the battery casing. This happened to us - we thought the lock was secure. This is key, because if the lock doesn't fasten to the backplate, it will fly off the door when you configure your lock. Turn the Danalock clockwise until it clicks into place. On the back of the lock, align the small marking at the edge of the backplate with the hole in the cover ring around your Danalock. Take your Danalock and fit it onto your backplate with the battery cover facing down. This means your adapter is secured and the Danalock is ready to be installed on your door. Once you have the right tailpiece adapter, insert it into your Danalock and press until you hear it click.

For our lock we had a Weislock and needed to use the white adapter.

Again, Danalock supplies a guide to help you find the right adapter for your lock. Once secured, find the tailpiece adapter that matches the shape of your existing lock's tailpiece. Remove the paper from the sticker on the backplate and fasten it to your lock on the door. Danalock provides three different types of backplates, and using the mobile app or supplied user setup guide, find the backplate that matches your existing lock. Keep the lock's original screws - you will need them again. We think the average consumer should plan to spend about 10 to 20 minutes, depending on your door type and the strength of your wireless signal - and the company provides very good instructions on their app if needed.Īfter downloading the Danalock app, available on either Google Play or App store, secure the front side of your current door lock by taping it to your door. It took us only a few minutes, but we have experience installing smart locks. GearBrain has tested many smart locks and some take a fair amount of time install. It also works with a wide variety of doors and locks, and comes with country-specific adapters for quick installation. Danalock, though, is much smaller and thinner than August Smart Lock, measuring only 59mm x 59mm (2 1/3 inches x 2 ½ inches) and weighing just 130 grams (4.6 ounces). That gives you a backup plan to unlock your door in case you can't connect to your smart lock. Both are easy to install, and require you change just one side of your lock. We put this lock through our testing procedures in a real home (and not a lab or the office) - and here is what we learned.ĭanalock's newest smart lock is a smart lock that reminds us of August Smart Locks. The company offered us a chance to test its Danalock V3 Smart Lock. Take Danalock, which makes smart locks and solutions for both smart homes and businesses, a company we met at last year's CES in Las Vegas, and again at this year's CES too. At GearBrain, we like finding new smart devices that are easy to install, and compatible with many best of breed smart gadgets and systems.

Best smart lock for airbnb 2019